Customization: | Available |
---|---|
Driving Mode: | Pneumatic |
Connection Form: | Welding |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Specifications
Sanitary Pneumatic Butterfly Valve
Position Indication Travel Standard
1). VD/VDE38454NAMUR.
2). The electromagnetic brake interface complies with the NAMUR standard.
3). The mounting connection complies with the ISO5211/DIN3337 standard.
4). The output torque is linearly proportional to the full range of the valve torque. The output power utilization rate is nearly 100% for the angular stroke valve.
5). The opening and closing speed is operated in the "slow-fast-slow" mode. The first stage is turned on, the end is turned off, and the buffer is automatically buffered. if necessary, the buffer speed can be adjusted steplessly.
6). It can meet the requirements of the valve"quick opening-fast closing" and "quick opening-slow closing" and other special working conditions.
7). The fitting sealing valve can quickly pass the "speed flow" port to reduce the erosion of the ball or butterfly port with granular media to make up for the shortage of the valve.
8). In the"three sections"(gas, electricity, signal), Miller can be reliably locked in place without the need for an additional retaining valve.
9). At the same torque, Miller's mass is less than 60% of the gear bar and 40% of the valve.
10). Air consumption is 30%-40% less than existing pneumatic actuators.
11). With regulation valve type valve, the inertia"pre-shoot" is small, the positioning accuracy is high, and the working condition after "reservation" must be self-locking after mediation, thus protecting the valve and the positioner.
12). Note: The actuator output should occupy the stem coaxially.
13). The connection between the actuator and the valve must not be loose and the positioning pin should the valve and the positioner.
14). The solenoid valve should be opened to the automatic position to ensure that the air circuit is unobstructed and the air supply must be 0.3-0.8Mpa.
Pneumatic Actuator
1). Control air pressure: 5~8bar.
2). Temperature range: -25ºC~90ºC
3). Air consumption: 0.26xp(bar).
4). Output maximum torque(Air/Spring): 35N.M(5bar)
5). Output maximum torque(Air/Air):65N.M(5bar)
6). There are three standard models for pneumatic heads, the Normally Closed(NC) Type. Normally Open(NO) type and Air/Air(A/A).
Actuator User Compressed Air Quality Requirements
1). Maximum particle size: 0.01mm,
2). Maximum oil content: 0.08ppm,
3). Dew point: 10ºC or lower below atmospheric temperature.
4). Maximum water content: 7.5g/kg.
Standard Stroke Angle
1). 0-90° can be adjusted ±4°
2). 0-120° can be adjusted±4°
3)0-180° can be adjusted±4°
Brand: | KT/OEM |
Applicable Media: | Water, Oil, Gas, Nitric Acid, Acetic Acid |
Certification: | CE/API/DNV/FDA/ISO9001-2008 |
Sample Testing: | One Sample for free( Under $10), Freight Collect |
Packing: | Plastic Bag, Carton & Plywood Case/According to customers' requirement. |
Payment: | T/T, L/C, D/P, Western Union, Paypal |
Port: | NINGBO/SHANGHAI, Customers' Request |
Delivery Time: | Within 35days after receiving T/T deposit Payment |
Term of Delivery: | FOB/CNF/CIF, Customers' Request |