Angle Seat Valve with Pneumatic Actuator
Angle Seat Valve with Pneumatic Actuator
Hot Sales Pneumatic Angle Piston Valve,
Stainless Steel Angle Piston Valve,
Pneumatic Flanged Angle Piston Valve in SS304, SS316 Material
Features
a. Easy to Install
b. Infinitely Rotatable Actuator Allows Pneumatic Connection in Any Position
c. 50% More Economical Than Ball Valves
d. 600% Longer Service Life Than Ball Valves
e. Compact Design
f. Fast Response
g. Water hammer-free
Specifications
a. Nominal Diameter: DN15-100
b. Pressure Range: 0-1.6Mpa
c. Medium Temp.: -10°C~+180°C
d. Ambient Temp.: -10°C~+60°C
e. Operating Pressure: 3-8bar
f. Valve Body Material: Stainless Steel, CF8/304, CF8M/316
g. Sealing Material: PTFE
h. Actuator Material: Plastic, Stainless Steel, CF8/304, CF8M/316
i. Medium: Neutral Gas, Air, Water, Vapor
j. Connection: Flanged, Clamped, Welding, Thread (BSP, BSPT, NPT)
k. Type: Double-acting, Single-acting, Water-proof Hammer
Product Introduction
The Angle Seat Valve maintains a flow rate to save space. It is a pilot angle seat valve that operates with a single-acting pneumatic actuator with spring safety, when using, you should choose Normally Open or Normally Closed. Angle Seat Valves are widely used for request start-ups in short periods of time and are characterized by responsive and accurate movement.
Product Category
Pneumatic Threaded Angle Seat Valve: DN10-80
Pneumatic Tri-Clamp Angle Seat Valve: DN15-80
Pneumatic Flanged Angle Seat Valve: DN15-80
All Stainless Steel Pneumatic Threaded(internal thread) Angle Seat Valve: DN10-65
All Stainless Steel Pneumatic Tri-Clamp Angle Seat Valve: DN15-65
All Stainless Steel Pneumatic Flanged Angle Seat Valve: DN15-80
Application Parameter
Pressure Range: 0-2.5Mpa(PN0-PN25)
Medium Temperature: -20ºC~200ºC(normal temperature type) -20ºC~300ºC(high temperature type)
Ambient Temperature: -10ºC~60ºC
Body Material: Stainless Steel.
Sealing Material: PTFE
Actuator Body Case: Polyamide, Stainless Steel.
Audited Supplier 
){kind=link}
){kind=link}