Pneumatic Sanitary Butterfly Valve Welding End
Sanitary Butterfly Valve With Pneumatic Actuator
Specifications
1). Nominal Diameter: DN50-600
2). Pressure Range: 0-1.0MPa
3). Medium Temp.: -20°C~+120°C
4). Valve Body Material: Gray cast iron, Ductile cast iron, Cast steel, Stainless steel
5). Sealing Material: NBR, EPDM, FPM
6). Valve Disc Material: Ductile cast iron, Cast steel, Stainless steel, Nickel alloy
8). Feature: Double bubble and zero leakage
9). Applicable Medium: Drinking water, sewage, high-purity water, seawater, air, etc.
10). Manufacture Standard: GB, ISO, ANSI, DIN
11). Control Feature: Double acting, Single-acting
Sanitary Pneumatic Butterfly Valve.
Position Indication Travel Standard
1). VD/VDE38454NAMUR.
2). The electromagnetic brake interface complies with the NAMUR standard.
3). The mounting connection complies with the ISO5211/DIN3337 standard.
4). The output torque is linearly proportional to the full range of the valve torque. The output power utilization rate is nearly 100% for the angular stroke valve.
5). The opening and closing speed are operated in the"slow-fast-slow" mode. The first stage is turned on, the end is turned off, and the buffer is automatically buffered. If necessary, the buffer speed can be adjusted steplessly.
6). It can meet the requirements of the valve"quick opening-fast closing" and "quick oping-slow closing" and other special working conditions.
7). The fitting sealing valve can quickly pass the"speed flow" port to reduce the erosion of the ball or butterfly port with granular media to make up for the shortage of the valve.
8). In the"three sections"(gas, electricity, signal), Miller can be reliably locked in place without the need for an additional retaining valve.
9). At the same torque, Miller's mass is less than 60% of the gear bar and 40% of the fork.
10). Air consumption is 30%-40% less than existing pneumatic actuators.
11). With regulating valve type valve, the inertia"pre-shoot" is small, the positioning accuracy is high, and the working condition after" reservation" must be self-locking after mediation, thus protecting the valve and the positioner.
12). Note: The actuator output should occupy the stem coaxially.
13). The connection between the actuator and the valve must not be loose and the positioning pin should be used if necessary.
14). The solenoid valve should be opened to the automatic position to ensure that the air circuit is unobstructed and the air supply must be 0.3-0.8Mpa.
Pneumatic Actuator
1). Control air supply pressure: 5~8bar.
2). Temperature range: -25ºC~90ºC.
3). Air consumption: 0.26xp(bar)
4). Output maximum torque(Air/Spring):35N.M(5bar).
5). Output maximum torque(Air/Air): 65N.m(bar).
6). There are three standard models for pneumatic heads, the Normally Closed(NC) Type. Normally Open (NO) type and Air/Air(A/A).
Actuator Uses Compressed Air Quality Requirements
1). Maximum particle size:0.01mm
2). Maximum oil content: 0.08ppm
3). Dew point: 10ºC or lower below atmospheric temperature.
4). Maximum water content: 7.5g/kg.
Standard Stroke Angle
0-90° can be adjusted ±4°
0-120° can be adjusted ±4°
0-180° can be adjusted ±4°
| Brand: |
KT/OEM |
| Applicable Media: |
Water, Oil, Gas, Nitric Acid, Acetic Acid |
| Certification: |
CE/API/DNV/FDA/ISO9001-2008 |
| Sample Testing: |
One Sample for free( Under $10), Freight Collect |
| Packing: |
Plastic Bag, Carton & Plywood Case/According to customers' requirement. |
| Payment: |
T/T, L/C, D/P, Western Union, Paypal |
| Port: |
NINGBO/SHANGHAI, Customers' Request |
| Delivery Time: |
Within 35days after receiving T/T deposit Payment |
| Term of Delivery: |
FOB/CNF/CIF, Customers' Request |
Audited Supplier 
){kind=link}
){kind=link}